CPM Europe provides Feeders and Conditioners for optimum preparation of raw materials.

Feeders and Conditioners

CPM Europe provides Feeders and Conditioners for optimum preparation of raw materials.

CPM Europe's Feeders and Conditioners provide an optimum preparation of raw materials prior to pelleting. The optimum feeding and conditioning of the product ensures you get the highest performance out of a Pellet Mill. Some of the benefits of proper feeding and conditioning is a higher production throughput, better pellet durability and improved digestibility at reduced Pellet Mill power consumption.

CPM Europe manufactures:
Conditioners for liquid and steam mixing
  • CPM Europe LL mixers can be applied in all conventional animal feed applications before pelleting
  • Product conditioning temperature between 50 and 70 ºC
  • Molasses can be added up to 8%, and 2% water
  • Product holding time is typically 20 sec. at 15 Tons per hour production

Conditioners for long retention time
  • CPM Europe LLX and LT mixers have large mixing barrels and typical slow running mixing shafts
  • Long product retention time has an advantageous effect on especially the gelatinization of starch particles in the feed
  • Product conditioning temperature between 70 and 90ºC
  • Molasses can be added up to 4% and 2% water
  • Product holding time is typically 30 sec. at 25 Tons per hour production

Conditioners for special heat treatment
  • CPM Europe Hygienisers provide a First in First out product flow which guarantees each product particle obtains the identical treatment
  • Subject equipment very suitable for hygienic feed production
  • Product conditioning temperature between 70 and 90ºC
  • Product holding time up to 10 min. at 20 Tons per hour production
  • Molasses up to 6% and 2% water
  • Product holding time up to 4 minutes at 15 Tons per hour production

Ripening vessels
  • CPM Europe Ripening vessels provide very long socking time for molasses and other liquids in the feed industry
  • Product conditioning temperature between 50 and 60ºC
  • Molasses can be added up to 15% and 2% water
  • The product holding time is typically 12 min. at 15 Tons per hour production

Feeders and conditioners features and benefits

  • Specially designed mixing shaft

    • The mixer barrel provides special inlet ports for steam, molasses and other type of liquids
  • Inventive steam addition

    • Added steam immediately condenses on the product
    • Mixer inlet flange prevents any steam escape to the feeding bin
    • Heavy duty sealing arrangement guarantees a very long service life of bearings
  • Precise peddle arrangement

    • Very precise trim to the mixer wall
    • The precise paddle adjustment ensures that the conditioner is effectively cleared after each production run
    • Spider arrangement at the mixer outlet provides a very stable feeding of the pellet mill
  • Feeder screw

    • Allow an easy installation on top of the pellet mill
    • Controlled product quantity
    • A permanent magnet between the feeder screw and conditioner provides extra safety against tramp metal

Choose among other products:
Pellet Mills, Hammer Mills, Feeders and Conditioners, Heat Treatment, Roller Mills, Flakers, Coolers, Crackers, Crumblers, Mechanical briquetting presses, Metal sludge hydraulic briquetting presses, Metal scraps briquetting presses